Connecticut Custom Airguns
  • Welcome!
  • Hector's Airgun Blog
  • Products and Products Blog
    • One-Off's
    • The "Héctors Special'" scope by Sightron
    • K1050i FT
    • The Hex Louver or "Secret Sunshade"
    • Pellet Path Calculator >
      • Questions, Answers and Comments on P-P Calc
      • Privacy Policy for PP-Calc
    • The Nautilus SideWheel
    • The X-10 TiltMeter
  • Zimmer-Silhouetten
    • Results 2017-2018
    • Results 2016-2017
    • Results 2015-2016
    • Results 2014-2015
    • Results 2013-2014
  • References and Links
  • Contact us
  • Store

Hector's Airgun Blog

Where we discuss, CIVIILY,  anything airgun.

Return Home

What links airgunners to the Chinese warriors of the 13th Century?

1/30/2016

9 Comments

 
If I told you that the Industrial Revolution started in China around the year 500 BEFORE the Common Era (BCE), would it be too difficult to believe?

And yet, it is true.

It is widely accepted that one of the premises of industrial production is the concept of "standard parts". I.E. parts that can be interchanged between assemblies and still maintain function of said assemblies; in a larger sense: parts that can be manufactured in large numbers by specialists, running special tools, jigs and gauges that allow them to ensure that the bunch of parts they make when assembled with the bunch of other parts that a bunch of other specialists like them have made, will produce a big bunch of assembled devices that work as intended. Enough to provide for an army.

Up until the 19th Century in the western world, all manufacturing was made by hand. Some parts were farmed out between different artisans and they each agreed on how to do things.
Large arms manufacturing regions grew up around this concept like Suhl and Styria in Europe, the Pennsylvania and Connecticut riflemaking areas in the USA and Tanegashima in Japan.

It is not uncommon in older guns (made between the 1400's and the 1800's) to find rifles that had one maker for the barrel, another for the lock and another for the stock. And that was good. It allowed for a number of independent makers to pool their resources to tackle a government contract. BUT there was also a downside: large parts were pretty much made all the same, or within certain practices and customs but, when even the screws had to be made by hand not all nuts screwed onto all screws! This created a peculiar situation where armies had real issues with maintenance.
Eli Whitney was the first western entrepreneur-politician to get the idea on the political map by getting Congress to give him money for the development of a standardized musket. The first successful demonstration of interchangeable parts to make long guns was done in front of a Congress committee in 1801 (the demonstration was rigged but), it allowed Whitney to get more funds and get the idea firmly rooted in the Industrial mind to the extent that it was from thereon, called the "American System".
By 1825 John Hall had implemented the idea of parts interchangeability and gauges for quality control at the Harper's Ferry Arsenal in Virginia.
It was not till just before the Mexican War (1846) that Joseph Whitworth in England standardized threads and screw sizes. By the Civil War, it was a common concept.

BUT, in the Far East, the idea of gauges, standard parts, standard metallurgy, and interchangeability had been born about 2,300 years before:
Picture
Sorry about the quality of the picture, but it is not easy to come across good, HD pictures from Chinese journals. Let's take a look at a diagram:
Picture
When the trigger is in the released position (as in the lower section of the diagram above), you can see that the locking lever and the sear are down, the trigger is in the back position.

As the bowstring is drawn (or the piston's stem pushed back), the locking lever is raised by turning on its axle pin, which in turn raises a stationary pin at the front of the bottom lobe of the locking lever. This stationary pin then acts on the slot of the sear to bring it up. The trigger notch then can engage the sear and lock everything in place, until the trigger is pulled.

Those of you that are observant will ask ¿How is the trigger moved forward to engage the sear? there is no spring to do that!
And while they would be right, they are forgetting how a crossbow is cocked: USUALLY, the bow is fitted to a stock that has a nose, and that nose is set on the ground so that the shooter can pull the string with both hands, Therefore it is gravity what pulls the trigger "forward" (down in reality) when the sear and trigger notch get aligned.

Chinese crossbows had no butt section in the stock, that was invented in the middle east many years later (remember we are talking 500 BCE for the time being) and so the shooter took aim with the crossbow held in front of his eyes, held with both hands in the air.

In this position, the upper bar of the cocking lever aligned the eye and the point of the arrow, and if suitable markings were applied to the rear end of the cocking lever, it would also allow the firing officials to tell their soldiers how high to aim.
When you field thousands of crossbows you are not really interested in the accuracy of a single bolt, but you are rather more interested in an approximate DISTANCE to impact.

Military records show that the Chinese had perfected the "rising curtain" barrage and knew how to coordinate that with their cavalry charges. Not bad for a time when the Romans were still fighting in "turtle formation".

As time went by, the arrows became also more and more standardized, and then the bows. By the times of China's First Emperor (Shi-Huang-Ti of the western world's literature, roughly 210 BCE), things were pretty uniform, to the point where we can identify who made what in his tomb by the measurements of the pieces:
Picture
It would take eight more centuries till the increased perfection of bows, arrows, and technique allowed some smart officers to dedicate corps of expert crossbowmen to pick off enemy officers and "decapitate" the efforts of the enemy army. By the year 1004 of the Common Era, the value of the well placed single shot became very apparent in the battle of Shanzhou.
From there, it took another 773 years till single marksmen could make a dramatic impact in the course of human history, and another 200 years to get to the point where "surgical snipers" were a valued element of all armed forces.
But, we digress, let's come back to the airgun world.

¿What links the crossbow and the airgun as far as the triggers are concerned?
For one is the MAIN function: BOTH need to hold back rather impressive forces, while at the same time allowing for relatively smooth release of a well positioned (if not aimed) shot.


I do not know if modern airgun trigger designers had read, heard, or seen these examples. The Western crossbow trigger is radically different (and inferior IMHO) and yet, when you see the diagrams of the finest of the early airguns in modern times you cannot but see the resemblance:
​​
Picture
In this diagram of the BSF "Bavaria Match Pistole" by TW Chambers, we can see that the part that is labelled SR221 in the pin DP416 looks uncannily similar to the sear of the Chinese trigger.

Apart from the form, and basic functions, there is one more area where crossbow triggers also resemble most airgun triggers: It is the rearward motion of the string (or Piston Stem), what initiates the cocking action in the trigger.

Let's look now at the Rekord trigger:
Picture
The piston stem pushes rearward on part 50d, which in turn forces part 50a "down/forward" and clicks part 52a under spring pressure.
When the trigger pushes part 52a UP, that allows part 50a to move "back" and allows part 50d to release the piston to move forward.

The TX-200 trigger is almost identical:
Picture
And the Walther LGU/LGV trigger is not far as can be seen in the photo hereunder.
In all these triggers the SHAPE of the parts may be a little different, but in essence it is the same trigger.
Picture
For years and years triggers had been simple affairs, limiting the power of air rifles, like the old Meteor:
Picture

Diana, for reasons all of their own have never followed too closely the general trends in the rest of the airgun world, they started with the non-unitized triggers made up of loose parts but evolved into the unitized T-01 trigger shown here:
Picture
The T-01 is a fine trigger for most purposes, it did open the field to higher powered airguns. The three ball sear is extraordinarily strong (strong enough to be used in some firearms as a bolt/chamber closing device) and allowed the use of very stout mainsprings and long strokes which meant that rifles were able to achieve muzzle energies in the region of the 20 ft-lbs in those countries where it was legal, but it has one disadvantage: it is slow for some type of precision work.

As is normal in companies, Diana developed new triggers that were numbered successively. The next major trigger was the T-05:
Picture
The T-05 is a "lawyer's trigger" because it takes considerable effort from the users to make it release at low forces, and therefore protects the company from any liability by ensuring that it is clear that any accidental discharge is the responsibility of the user, not of the company.
The T-05 CAN be made into a fine trigger, but it can never achieve the speed of release or the lightness of release that a Rekord/TX-200/LGV/LGU/Quattro.  .  .  can achieve. The sliding plates simply take too much time in getting out of the way.

Enter the T-06 trigger:
Picture
The T-06 is a "gunsmith's trigger".

It operates well from the start and it gets better with use. The parts that are REALLY under stress are hard steel castings and forgings. The process of fabrication itself yields parts that are tough cored and yet surface hard. Which is exactly what you want: inner strength and smoothly surfaced.

Seeing all the parts involved may frighten at first, but if we go to the core of the trigger, we see that we still have 3 basic levers interacting with each other to cock the rifle, and then release the spring.

Let's look at a simpler diagram:
Picture
In the case of the T-06, the piston does not have to push back on the locking lever because the locking lever is a hook.
The piston just needs to go past the hook to be latched/locked. The cocking of the trigger itself takes a lot less force than in the case of the typical airgun trigger.
Once the piston goes past the hook/locking lever, the sear engages and is blocked from allowing the hook to let go of the piston by the sear lever.
The sear lever is held in place by the spring and the trigger blade. As screw #1 is adjusted in, the degree of engagement of the first stage is set, and then the the additional force required to release the sear lever that then releases the sear is regulated by the second stage screw.

There is space in this trigger to add a true first stage travel regulation screw, but that is truly a job for a professional:
Picture
As it comes from the factory, the T-06 is a good trigger, but a trigger job can make it into a GREAT trigger.

Selective additional parts, polishings and some tuning/changing of the screws will yield a trigger that is as good as any Match trigger. It has the speed to work well for offhand shots and the precision and repeatability for precision supported shots.
It CAN be made very light, but you really do NOT want too light a trigger. It is not only hard to control, but also VERY EMBARRASSING to loose points to a trigger that goes off with a thought. 

A good trigger weight is around 1# give or take ½ of it. Some of us like triggers in the 2# region and with a good second stage because the "taking up" of the first stage is where we finish our mental preparation to release the shot.

Triggers have been advancing for almost 2,300 years, and we are lucky to be standing on the shoulders of giants. That first locksmith that designed the relatively complicated mechanism that performs all needed functions without hassle, day in day out; that will hold forces in the region of hundreds of pounds and, still, release those great forces with the exertion of a pound or two of our index fingers. Yes, if we can see far it is because we are standing on the shoulders of giants.

And so, next time that you are about to break a shot. Think for a moment about all those Chinese crossbowmen that enjoyed what in THEIR time was the epitome of the shooting art, and feel yourself in good company.

Keep well and shoot straight!





Héctor Medina
9 Comments
RidgeRunner
1/31/2016 06:18:50

Hector,

Another awesome blog! The diagrams clearly illustrate that what was old is new. It is just a bit more refined today.

Speaking of old BSA triggers, my 1906 BSA has a single stage trigger. It has a very stiff pull to it, but the break is clean with no creep. It takes some adjustment to go from a Feinwerkbau to it, but after a bit of time with it, you can do quite well with it. As you stated though, this type of trigger does limit the amount of force you can use with it.

I have always been a fan of a nice trigger. I am having a bit of trouble deciding whether my next trigger will be a Rekord, an Air Arms or a Walther. Sometimes we have tough decisions in life.

I do have a new trigger to occupy me for a bit while I decide. I just recently acquired a Diana 46E. I have not had much time to play with it as of yet, but from what little time I have spent with it I would have to say it is one of the finest triggers I have pulled short of a Feinwerkbau.

I have not researched what model trigger it has and I also suspect it has had some work done. It has about 1/4" of a light 1st stage and the second stage has a beautiful, clean break of about 1#.

Hopefully it will warm up enough today so I can pull on it a few times this afternoon.

Reply
HECTOR J MEDINA GOMEZ
1/31/2016 20:53:32

R R;

The 46E usually had the T-01 trigger with the three ball sear, though there are some T-05's. The T-01 rifles can be tuned quite well to release cleanly. Again, the ONLY problem with the T-01 is the time it takes to release the piston.

You can get a replacement piston and trigger unit that will convert your 46E into a T-06. It is the same piston that is used in the D34 and the T-06 trigger is uniform to all the Diana line.

Of course you can choose to keep the T-01 trigger, just make sure that you keep a spare ball holding barrel (part #30317900) . That is the part that usually wears out fastest.

HTH!





Héctor

Reply
RidgeRunner
2/2/2016 14:08:03

Hector,

I thank you much for this information! I will certainly keep this in mind. I just may have to pick up one of those barrels for just in case.

Bob R.
2/2/2016 09:19:58

Great piece of history and explanation of modern airgun triggers.

You may have seen my post on GTA about how I modified my LGU trigger to approach the feel and let off of the TX200 trigger.

After careful study, I determined the biggest problem with the LGU trigger was the second stage pin. that is built into the trgger itself, which presses on the sear arm (called the bottom sear in the TX diagram) is just too close to the pin that sear arm rotates about and does not allow enough leverage to be applied by the second stage.

After trying the "Yankee" trigger and the tuning trigger, which has its second stage screw still to close to the fulcrum point, I modified the factory trigger by adding JB Weld to its sides to fatten it up so I could drill a hole through it, closer to the first stage screw and a bit further away from the fulcrum pin on the sear. I then threaded a new second stage screw into the hole and made the necessary adjustments.

I found the small move made a world of difference. Now my LGU trigger closely approaches the very light let off of the TX trigger with zero drag or play whatsoever.

It looks like the picture of the LGU/LGV trigger is a high quality animation and doesn't appear to show just how close the second stage contact point really is.

The TO-6 trigger adjustments are the reverse of the TX and LGU's in that, due to design, the first stage screw is the one closest to the pivot point and the sear and the second stage is furthest away. Notice how far out on the arm it is. That is pure leverage mechanical advantage and a large reason why the trigger can be as fine tuned as it is.

Reply
RidgeRunner
2/2/2016 14:10:25

Bob,

Nice little tidbit to know. I have been dreaming of a LGU.

Reply
Bob R.
2/2/2016 17:21:10

It is a very accurate gun right out of the box. I found it to have way too much oil in all the spots you don't want oil and a note in the manual to shoot it until the smoke clears.

Anyone knowing anything about spring air rifles knows that smoke and loud noise is not good. I broke it down, first thing, and cleaned it out. Then relubed it properly and went from there. Doing that may have disrupted the warranty, but I wasn't going to shoot it until it the smoke cleared. It would be a good way to mess up the innards.

Reply
RidgeRunner
2/3/2016 04:28:03

Bob,

Oh I do indeed know exactly what you are talking about. Several years ago I had a Gamo CFX that I sent to a well known airgun company and had them replace the spring with a gas spring.

Shortly after I received it I was shooting and suddenly there was a loud report like that of a .22LR and a cloud of smoke. I had a massive detonation that literally blew out every seal in that CFX.

Fortunately they were nice enough to replace the seals and my spring at no charge and refund me for the gas spring.

Reply
Outdoorman
2/3/2018 20:19:47

You left out a very important part of the T06 trigger operation. That is the cocking slide which is a plate on the side of the safety mechanism. There is a hook on the front of it which is what cocks the trigger. The piston stem pushes back on the safety when you pull the barrel all the way open. The cocking slide pulls the sear back until the sear lever clicks into place preventing the sear from rotating back until you pull the trigger.

Reply
Hector Medina
2/5/2018 13:39:09

I am not so sure I follow exactly what you mean.

You write :"There is a hook on the front of it which is what cocks the trigger."

Are you saying that it is plate #24 the one that cocks the trigger blade (#137)? Or did you mean the sear (#130)?

If you are referring to the sear, I think we agree. I can see where my syntax could be improved.

Thanks for reading!



HM

Reply



Leave a Reply.

    Hector Medina

    2012 US National WFTF Spring Piston Champion
    2012 WFTF Spring Piston Grand Prix Winner
    2013 World's WFTF Spring Piston 7th place
    2014 Texas State WFTF Piston Champion
    2014 World's WFTF Spring Piston 5th place.
    2015 Maine State Champion WFTF Piston
    2015 Massachusetts State Champion WFTF Piston
    2015 New York State Champion WFTF Piston
    2015 US National WFTF Piston 2nd Place
    2016 Canadian WFTF Piston Champion
    2016 Pyramyd Air Cup WFTF Piston 1st Place
    2017 US Nationals Open Piston 3rd Place
    2018 WFTC's Member of Team USA Champion Springers
    2018 WFTC's 4th place Veteran Springer
    2020 Puerto Rico GP Piston First Place
    2020 NC State Championships 1st Place Piston
    2022 Maryland State Champion WFTF 

    Archives

    April 2022
    February 2022
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    September 2019
    August 2019
    July 2019
    May 2019
    April 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    June 2018
    May 2018
    April 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    March 2017
    December 2016
    October 2016
    September 2016
    July 2016
    June 2016
    March 2016
    January 2016
    December 2015
    November 2015
    October 2015
    September 2015
    August 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    November 2014
    October 2014
    August 2014
    July 2014
    June 2014
    May 2014
    March 2014
    February 2014
    December 2013
    November 2013
    October 2013
    September 2013

    Categories

    All
    Events
    Gear
    Hunting
    Tests

    RSS Feed

Proudly powered by Weebly